DOSE-VERIFIED UV-C
UVCeed pairs a portable UV-C device with your smartphone to guide coverage, measure delivered dose, and confirm when the selected treatment target has been reached.
Four Reasons You Need UVCeed
Portable UV-C treatment with measured dosage and app-guided coverage
App-Guided. See Every Pass.
Real-time coverage and dose guidance through your phone camera so you know surfaces are clean.
Done in Seconds
The app reports “Target dose reached” when the selected treatment target has been met.
Everyday. On the Go.
Clips to your phone and goes everywhere. Hotels, restaurants, gyms, daycare pickup.
No Chemicals Needed
UV-C light does the work, leaving no liquid chemical residue. For clean, hard, nonporous surfaces after visible soil is removed. Not for direct treatment of food or liquids.
Guided coverage, measured dose, clear completion
How UVCeed guides coverage and measures the UV-C dose it delivers
Attach and pair
Attach UVCeed to a compatible phone or approved adapter, then pair it with the UVCeed app. Check the compatibility information before ordering.
Check compatibility
Select a mode and position
Select the appropriate mode and hold the device within the specified range of a clean, hard, nonporous surface.
Hold within range
Follow the coverage guidance
See exactly what's happening as UV light works. No guessing, no hoping - you see the progress live.
Coverage and dose on screen
Stop at the target dose
The app reports “Target dose reached” when the selected treatment target has been met, or “Coverage incomplete” if areas still need another pass.
Target dose reachedSteps reflect the current app on both supported platforms. Read the full operating instructions, including the specified treatment range and material guidance.
Independent Test Results
Results below were produced in independent laboratory testing on clean, hard, nonporous test surfaces. Each figure applies only to the organism, exposure time, and distance shown.
| Organism | Reduction | Exposure time | Distance | Surface |
|---|---|---|---|---|
| Staphylococcus aureus | 99.9% | 15 seconds | 12.7 cm | Clean, hard, nonporous |
| Escherichia coli | 99.99% | 24 seconds | 12.7 cm | Clean, hard, nonporous |
| SARS-CoV-2 | 99.9% | 32 seconds | 12.7 cm | Clean, hard, nonporous |
| SARS-CoV-2 | 99.99% | 64 seconds | 6.5 cm | Clean, hard, nonporous |
Results apply only to the tested organisms, surfaces, distances, and exposure times shown. Performance on other surfaces or at other distances has not been established. Remove visible soil before treatment. UVCeed is an added step after cleaning, not a replacement for it.
Read the full laboratory report
Untreated control
After UV-C treatment
Disinfectant products must be used according to their label, including any required wet contact time. UVCeed provides a reusable, liquid-free treatment option for approved uses.
Before you buy
Use It Correctly
UV-C only treats what the light reaches, at the dose it delivers. These are the conditions that determine whether a treatment works.
-
Clean first
Remove visible soil before treatment. UVCeed is an added step after cleaning, not a replacement for it, and UV-C is far less effective on soiled surfaces.
-
Stay within range
Hold the device within the treatment range given in the operating instructions. Distance changes the delivered dose, which is why the app measures it rather than running a fixed timer.
-
Direct exposure only
UV-C treats only surfaces the light reaches directly. Shadowed, obstructed, or angled areas are not treated.
-
Reposition for shaded areas
If the app reports “Coverage incomplete”, move the device or rotate the item so each face is exposed, and treat again.
-
Approved materials
Designed for clean, dry, hard, nonporous surfaces. Porous items, fabrics, and liquids are outside the tested scope, and UVCeed is not for direct treatment of food or water.
-
Never at skin or eyes
Treatment stops automatically when the system detects a person, pet, hand, or face, but you must still never direct UV-C at skin or eyes. Use only as instructed and keep out of reach of unsupervised children.
Full operating instructions, including the specified treatment range and material guidance, ship with the device and are available in the support documentation.
Fits Your Life, Protects What Matters
Discover how UVCeed fits seamlessly into your daily routine
Everyday family items
Follow on-screen coverage guidance on hard, nonporous toys and shared items after visible soil is removed.
Shared spaces, personal control
Take control of shared equipment at gyms, offices, and public spaces with visible results.
Beauty tools, hygienically maintained
Elevate your self-care routine with visible cleanliness for brushes, tools, and accessories.
Business travel, protected
Hotel rooms, rental cars, airline trays - disinfect the surfaces you touch most during travel.
See the Dose You Deliver
UVCeed is for anyone who wants to see the UV-C dose they deliver. Hotels, offices, shared spaces - anywhere you want visible proof of cleanliness.
Where UVCeed is being used right now
Approximate locations, shared anonymously. No personal data is collected.
Your Questions, Answered
Clear explanations about how UVCeed works, addressing common questions from our viral videos.
Does my iPhone flash actually disinfect things?
No, your iPhone flash does not disinfect anything. In our viral video, the iPhone is just providing visual feedback through our app - it is UVCeed 254 nm UV-C LED doing the actual treatment.
The app shows coverage and delivered dose as you work and reports when the target dose has been reached. Think of it as a smart timer with visual feedback - the science happens in the UVCeed device.
How does UVCeed actually work then?
UVCeed contains a 254 nm UV-C LED, a wavelength in the germicidal range. This is the same technology hospitals use for disinfection.
The iPhone integration serves three purposes: 1) Power control through the app, 2) Real-time progress tracking, and 3) Safety monitoring with automatic shut-off.
The actual disinfection happens when UV-C light from UVCeed's LED hits the surface, breaking down harmful microorganisms in just 30 seconds.
What makes this different from other UV sanitizers?
Most UV sanitizers are boxes that only treat items small enough to fit inside. UVCeed clips to your phone, so you bring it to the surface instead - restaurant tables, gym equipment, office keyboards. It is designed for clean, dry, hard, nonporous surfaces within the specified treatment range; shaded or obstructed areas require repositioning.
The iPhone integration also provides something no other UV device offers: real-time visual confirmation that disinfection is actually happening and when it's complete.
Plus, it's pocket-sized and goes wherever your phone goes, so you're never without protection.
Is this just for germaphobes?
Not at all. UVCeed is for anyone who wants to see the UV-C dose they deliver rather than guess at it. It's about visible confidence.
Our users include busy parents, frequent travelers, gym-goers, office workers, and healthcare professionals who want visible confirmation of cleanliness.
Think of it like having a flashlight for germs - it's a practical tool that gives you information and control, not fear.
Is UV-C light safe to use around people?
Designed with automatic exposure safeguards. Treatment stops when the system detects a person, pet, hand, or face. Never direct UV-C at skin or eyes; use only as instructed. The device only operates when properly positioned on a surface, and the app monitors the entire treatment.
The UV-C light is directed downward onto surfaces and automatically stops if the device is moved or lifted during operation.
Designed with automatic exposure safeguards. Treatment stops when the system detects a person, pet, hand, or face. Never direct UV-C at skin or eyes; use only as instructed.
How do I know it is actually working?
In independent laboratory testing on clean, hard, nonporous test surfaces: S. aureus, 99.9% reduction in 15 seconds at 12.7 cm; E. coli, 99.99% in 24 seconds at 12.7 cm; SARS-CoV-2, 99.9% in 32 seconds at 12.7 cm and 99.99% in 64 seconds at 6.5 cm. Results apply only to tested conditions. The app shows where the target UV-C dose has been delivered and reports when the target has been reached.
Plus, UVCeed is used in professional settings including Sarah Bush Lincoln Hospital, where effectiveness isn't optional - it's verified.
Unlike chemical wipes or sprays, you can actually see the UV-C light working and get confirmation when the cycle is complete.
Does UVCeed work with Android phones?
Absolutely! UVCeed works seamlessly with Android devices. The UVCeed app is available for free download on the Google Play Store with all the same features as the iOS version.
For Android phones and other devices without MagSafe, we include a premium metal plate adapter in every package. Simply attach the adapter to your phone or case, and UVCeed will snap on securely - giving you the same magnetic convenience iPhone users enjoy.
Whether you're team iPhone or team Android, you'll get the same powerful UV-C disinfection with real-time visual feedback through your phone's screen.
Add dose-guided UV-C treatment to your routine.
30-Day Money-Back Guarantee • Free Shipping • 1-Year Warranty
Secure Payment
